Stixall extreme power is the ultimate combined combined building adhesive and sealant, based on hybrid polymer technology, with the most extreme power to both bond and seal virtually everything to anything in virtually all conditions, even under water or in the rain! Stixall extreme power offers almost limitless benefits as an adhesive and a sealant removing the previous application barriers associated with conventional products.
Application
Cartridge : Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to the required width and apply with a standard sealant gun.
Sealant : Reference should be made to the recommended joint ratios. If necessary reduce joint depth using everflex expanding foam or joint backer rod. Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.
Where the sealant is used in a joint configuration, masking tape should be used to prevent contamination of adjacent substrates, and ensure a neat sealing line. Masking tape should be removed immediately after tooling. The joint should be tooled within 5 minutes of application to ensure good contact between the sealant and the substrate. Tooling of the sealant also gives a smooth, professional finish.
Storage
Store in cool, dry conditions between 5 and 25°C.
Shelf life
12 months in original un-opened containers.
- Technical Data DOWNLOAD
- MSDS Data DOWNLOAD
- Stixall Extreme Power - Crystal Clear rev 9 DOWNLOAD
- EVERBUILD STIXALL CLEAR V5.6 DOWNLOAD
- Stixall Leaflet new-1 DOWNLOAD
- Stixall colours DOP V1 DOWNLOAD
- Stixall Clear DOP V2 DOWNLOAD
